Sponge holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small hanging organizer for sponges, scrubbers, scrapers, and other misc sink related items.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 103
- Wydruki
- 2
- Wyświetlenia
- 713
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple hanging caddy for assorted sponges, scrubbing pads, scrapers, brushes, or whatever you would like to keep off the counter or out of the sink.
I made the version labeled ‘Squiggles’ and realized as it printed that the geometry didn't work printing it on it's side as I had intended. So I rotated it to print on its back to solve the floating extrusions, but the model would be stronger if printed on it's side due to the direction of the layer lines (especially the hook). I remodeled it with lines and circles so it could be printed on its side if someone wishes, but I've also included my original squiggle model. You'll need pretty good bridging for the ‘Lines’ version, or reorient it.
Other than supports for the hook, whatever parameters you normally print with should work fine.