Blue Yeti VIVO Mount

A quick mount for the Blue Yeti microphone so it can attach to a VIVO monitor stand.

Designed for a ~35mm diameter monitor stand.

.step and .f3d files included.

Print instructions

Category: Office Summary

A quick mount for the Blue Yeti microphone so it can attach to a VIVO monitor stand.

Designed for a ~35mm diameter monitor stand.

.step and .f3d files included.

Print Settings

I printed this with a0.8mm diameter nozzle using:

• 2 walls
• Adaptive layers ranging from 0.1mm to 0.5mm
• 15% gyroid infill for the base and mic side
• 15% grid infill for the bolt
• Simi-flexible filament for the gasket

• PETG for everything else
  With a 0.8mm nozzle the arm is very rigid, a smaller nozzle will likely need more walls.
  The base and mic side will need supports around the connecting joint.
  You will need2x gaskets, one on each side of the connecting joint.

  Other Additional Hardware

• 2x M3x16mm+ screws

• 2x M3 nuts.

• The spacers, washers and thumb screws from your blue yeti.
  The screws and nuts are used to secure the mount in place on the monitor stand.

  Change Log

  18-4-2019: Add middle piece, fix chamfer on base piece.
  18-4-2019: Added threads to middle piece, oops.