Sine Wave Lamp Shade [Mini Version]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A true sine wave profile lamp shade.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
A true sine wave profile lamp shade. Since some people have a Prusa Mini, I modified my lamp shade to make a mini version [176x175x175] of the original Sine Wave Lamp Shade [243x196x198]: https://www.prusaprinters.org/print/41599/edit.
Ideas to Use:
- Use it as a lamp assembly with the stem from my other design: https://www.prusaprinters.org/prints/41234-curvy-lamp-shade-with-stem-assembly
- Hang it on a wall as a pendant lamp as shown in pictures
- Flip it upside down and print out a panel to convert to a pretty trash bin. ref the Mini panel: https://www.prusaprinters.org/prints/41601-panel-to-convert-sine-wave-lamp-shade-to-trash-bin
Goes with the full lamp assembly: https://www.prusaprinters.org/prints/41234-curvy-lamp-shade-with-stem-assembly
Print instructions
Print with the max layer height [0.25mm on the Prusa Mini] with 1 perimeter and 0% infill. These settings are defined in the .3mf file.
I recommend printing with Prusament White PLA for the best translucency. An off-brand white PLA may or may not do the trick even with only 1 perimeter.