1 / 10
Ford Smax mk2 (2015-2019) - energydrink can inlay for cup holder — zdjęcie 1
1 / 10

Ford Smax mk2 (2015-2019) - energydrink can inlay for cup holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Can inlay for cup holder to prevent can to tip over in too large cup holder.

Ocena
5 / 5
Polubienia
10
Pobrania
96
Wydruki
1
Wyświetlenia
677
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind.

Also habe ich Maß genommen und eine Art Reduzierhülse für den Getränkehalter konstruiert.

Gedruckt habe ich den Halter in matt schwarzem PLA von Eryone.

Ich habe dazu das generic profil für PLA im Prusa slicer gewählt und lediglich die erste Schicht mit 215/60 grad und anschließend mit 205/60 Grad gedruckt. Als Schichthöhe habe ich 0,25mm gewählt.

 

English:

The narrow energy drink cans unfortunately always tend to tip over in our Ford Smax, because the rather large cup holders are not really suitable for smaller cans.

So I took measurements and constructed a kind of reducing sleeve for the cup holder.

I printed the holder in matt black PLA from Eryone.

I chose the generic profile for PLA in the Prusa slicer and printed only the first layer with 215/60 degrees and then with 205/60 degrees. As layer height I have chosen 0.25mm.


 

Tagi