1 / 1
Bridging Test
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and fast print to dial in your bridging settings
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Bridging Test
Just a simple and fast print to get your bridging settings dialed in.
I uploaded the Fusion 360 model so that you can modify the model parameters on your own.
CURA workflow:
- import the model in Cura.
- use the “per model setting” -> “normal model” and select the parameters you want to optimize (I suggest 1, max 2 parameters at a time if they don’t interfere with each other).
- once you have selected the parameters, multiply the model for the number of test you want to make and change the parameters of every single model accordingly.
- print it.
- Iterate.
Hope this is useful for someone.
I’m sure you can do something very similar in PrusaSlicer, but that’s not my cup of tea. If someone is willing to create the PrusaSlicer workflow, you can message me and I will paste it here.
Print Settings:
That’s the scope of the model, so I cannot suggest anything. 🤣