Darth Maul's Half Lightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Half of Maul's Lightsaber from the Clone Wars aka Maul's Favorite Cheese Grater
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed Half of Maul's Dual Lightsaber from the Clone wars, Season 5 in Fusion 360. I would recommend for the blades that you use PETG with no cooling to make the blades as strong as possible. As for the hilt, I used some silver PLA. The pommel screws into the hilt. This is all printed on the Ender-3. These design feature magnets so that you can walk with a lightsaber as they do in the trilogy. You will need two magnets which have the following dimensions; 30mm x 10mm x 5mm. The blade extends to about 900mm.
Print settings:
0.2 mm Layer Height
10% Infill
3 walls
3 Bottom&Top Layer
BuildPlate Support