Darth Maul's Half Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Half of Maul's Lightsaber from the Clone Wars aka Maul's Favorite Cheese Grater
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
I designed Half of Maul's Dual Lightsaber from the Clone wars, Season 5 in Fusion 360. I would recommend for the blades that you use PETG with no cooling to make the blades as strong as possible. As for the hilt, I used some silver PLA. The pommel screws into the hilt. This is all printed on the Ender-3. These design feature magnets so that you can walk with a lightsaber as they do in the trilogy. You will need two magnets which have the following dimensions; 30mm x 10mm x 5mm. The blade extends to about 900mm.
Print settings:
0.2 mm Layer Height
10% Infill
3 walls
3 Bottom&Top Layer
BuildPlate Support