Tea Display (free standing tray)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your Tea nicely with this 1 or 2 levels freestanding tray/shelf.
- Ocena
- 4,4 / 5
- Polubienia
- 60
- Pobrania
- 128
- Wydruki
- 3
- Wyświetlenia
- 921
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
Freestanding Shelf for displaying Tea.
Ideal for an office environment or for placement on a side / coffee / tea table.
There are 2 types:
1 Level for 3 positions:
For printing you need 1x Base (3 pos) + 1x Rail
Optional highlighting of engraving: either print the decoration inlays flat and glue them in place (If you don't own a multi-head printer or MMU) or use the Base (3 pos) MMU which contains the different parts.
2 Levels for 6 positions:
For printing you need 1x Base (6 pos) + 2x Rail + Shelf (6 pos)
Optional highlighting of engraving: either print the decoration inlays flat and glue them in place (If you don't own a multi-head printer or MMU) or use the Base (6 pos) MMU which contains the different parts.
For assembly I would advise to glue all parts to secure them firmly (I did). All parts can be printed without support.
I printed with fuzzy mode for the base (6 pos) and shelf. The connection between the shelf and the base therefore became too tight, I had to trim it a bit to get it to fit.
Tip: If you want to glue the decoration as inlays, you can scale in Z to make the decoration stick out more. (thicker printing)