Tea Display (free standing tray)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display your Tea nicely with this 1 or 2 levels freestanding tray/shelf.
- Rating
- 4.4 / 5
- Likes
- 60
- Downloads
- 128
- Makes
- 3
- Views
- 921
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
Freestanding Shelf for displaying Tea.
Ideal for an office environment or for placement on a side / coffee / tea table.
There are 2 types:
1 Level for 3 positions:
For printing you need 1x Base (3 pos) + 1x Rail
Optional highlighting of engraving: either print the decoration inlays flat and glue them in place (If you don't own a multi-head printer or MMU) or use the Base (3 pos) MMU which contains the different parts.
2 Levels for 6 positions:
For printing you need 1x Base (6 pos) + 2x Rail + Shelf (6 pos)
Optional highlighting of engraving: either print the decoration inlays flat and glue them in place (If you don't own a multi-head printer or MMU) or use the Base (6 pos) MMU which contains the different parts.
For assembly I would advise to glue all parts to secure them firmly (I did). All parts can be printed without support.
I printed with fuzzy mode for the base (6 pos) and shelf. The connection between the shelf and the base therefore became too tight, I had to trim it a bit to get it to fit.
Tip: If you want to glue the decoration as inlays, you can scale in Z to make the decoration stick out more. (thicker printing)