DIY Desk mat tube, or playmat tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mat tube you can make from hardware store pipe.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 2309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I had some pipe laying around and thought what if I stored my play mat in one of those. The cap is designed in fusion 360.
materials
-1 x two inch inner diameter tube cut to whatever size you need. ( If your cutting a tube for a TCG playmat, a comfortable size is about 15 inches long. )
A link to the tube I used:
Note: I recommend buying a larger piece if you plan on making multiple, a 10ft piece cost 20$ and a 2ft piece cost 10$
https://www.homedepot.com/p/Charlotte-Pipe-2-in-x-2-ft-ABS-Foam-Core-Schedule-40-Drain-Waste-and-Vent-DWV-Pipe-ABS-03200-0200/202017937
Features
-Triangle shaped caps prevent rolling
-small holes allow for paracord attachment points if you want to make a sling
-caps are designed for only one side come off when both ends are pulled.
Build notes:
-If you are unsure if the tube is the correct size, the outer diameter of the tube I used is 60mm.
- The tolerances should already be tuned to fit this tube, but if you encounter any issues, you should just be able to scale it to size in cura.
Other notes:
Let me know what you think and if there are any glaring problems I missed when making this tube.
