1 / 2
DIY Desk mat tube, or playmat tube — image 1
1 / 2

DIY Desk mat tube, or playmat tube

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mat tube you can make from hardware store pipe.

Rating
0 / 5
Likes
21
Downloads
104
Makes
0
Views
2,309
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

I had some pipe laying around and thought what if I stored my play mat in one of those. The cap is designed in fusion 360. 

materials

-1 x two inch inner diameter tube cut to whatever size you need. ( If your cutting a tube for a TCG playmat, a comfortable size is about 15 inches long. )

A link to the tube I used:

Note: I recommend buying a larger piece if you plan on making multiple, a 10ft piece cost 20$ and a 2ft piece cost 10$

 https://www.homedepot.com/p/Charlotte-Pipe-2-in-x-2-ft-ABS-Foam-Core-Schedule-40-Drain-Waste-and-Vent-DWV-Pipe-ABS-03200-0200/202017937

Features

-Triangle shaped caps prevent rolling

-small holes allow for paracord attachment points if you want to make a sling

-caps are designed for only one side come off when both ends are pulled.

Build notes: 

-If you are unsure if the tube is the correct size, the outer diameter of the tube I used is 60mm.

- The tolerances should already be tuned to fit this tube, but if you encounter any issues, you should just be able to scale it to size in cura.

Other notes:

Let me know what you think and if there are any glaring problems I missed when making this tube.

 

Tags