BME280 extrusion mount for Voron 2.4 and Voron 0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for BME280 on Voron printer ABS/ABS+, No support, Dia 0.4mm , layer height : 0.2mm
- Ocena
- 0 / 5
- Polubienia
- 81
- Pobrania
- 261
- Wydruki
- 1
- Wyświetlenia
- 2732
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
BME280 is a temperature sensor, it also gives humidity and pressure. I use it as chamber temperature sensor in my Voron 2.4.
There is several form factor, be careful to have the one on picture to use this mount
(eg. https://www.amazon.com/KeeYees-Temperature-Humidity-Atmospheric-Barometric/dp/B07KYJNFMD)
Klipper Configuration
Plugged on Pi :
[mcu rpi]
serial: /tmp/klipper_host_mcu[temperature_sensor chamber]
sensor_type: BME280
i2c_address: 118
i2c_mcu: rpi
i2c_bus: i2c.1
Plugged on BTT Octopus (PA8/PA9):
i2c_bus is not well documented , you can find it in source of klipper: for example BTT Octopus has STM32 cpu , look at https://github.com/Klipper3d/klipper/blob/master/src/stm32/i2c.c
[temperature_sensor chamber]
sensor_type: BME280
i2c_address: 118
i2c_bus: i2c1aBill of materials
| Category | Qty | Description | Notes |
| Hardware | 1 | BME sensor | |
| Hardware | 2 | M3x8 BHCS | |
| Hardware | 1 | M3 T-nut | for 2020 extrusion V2.4 |
| Hardware | 1 | M3 Drop-in nut | See DIY Drop-in nuts |