Elegoo Neptune 2 - Hidden Nozzle Holder and organized Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Remix of 7egends model which has dedicated slots for SD and USB devices.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 134
- Wydruki
- 3
- Wyświetlenia
- 598
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Elegoo Neptune 2 - Hidden Nozzle Holder and organized Tray
A slight modified version of 7egends hidden Nozzle holder/ tray. This one includes a seperation of the tray and also dedicated spots for the USB-microSD adapter, two microSD cards and one SD card.
Printing:
I printed the model on a ELEGOO Neptune 2s, with PLA filament, layer height 0.2 mm.
First layer: 215°C/ 55°C 20mm/s
Others: 205°C/ 50°C 60mm/s
Supports are necessary!!!
Filament: ERYONE PLA in Matt Black
Post processing:
Remove the supports and then just a little bit of scraping with an exactoblade here an there, if you want to smooth out some of the edges.
Hardware:
You can use a piece of electrical tape for a more tight fit on the crosssection.
Make sure to post a MAKE if you like the model. Let me know your thoughts for further improvements.