Alternative power inlet foot for Voron V0.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the Voron V0.2 power inlet foot to support an alternative power inlet.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a remix of the Voron V0.2 power inlet foot to fit an alternative power inlet from Aliexpress which attaches with two screws. There are two versions: the first one uses the same preloaded nuts that the V0.1 inlet mount used (i.e. facing downwards instead of the rear-facing V0.2 nuts) to avoid having to disassemble the printer when upgrading, the other version uses the V0.2 style mount. Doesn't have the Voron logo like the original, there isn't much room and it's at the back of the printer anyway…
Other features
- a mostly closed back to prevent anything touching the live terminals
- space for a strain-relief zip tie for the cable.
Hardware required
- alternative power inlet
- 1 M3x40 BHCS (same as original)
- 1 M3x10 BHCS for rubber foot (same as original)
- 2 M3x8 BHCS (for mounting, replaces original M3x10)
- 2 M3x6 FHCS/BHCS for attaching power inlet. 8mm length also works.
- 4 heatset inserts (two more than original)
- small zip tie
Print settings
Standard Voron print settings and material (ABS/ASA). No supports needed.