Mini Rocket (Tumble Recovery)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vase mode printable inspired by the classic Mosquito mini engine-powered model rocket
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
This is a printable design inspired by the classic Mosquito mini engine-powered model rocket.
It's currently in development/testing, so feedback is welcome!
I would recommend launching on a 1/4A of some kind (e.g. 1/4A3-3T); I've lost one on a 1/2A.
The model is designed to print in vase mode and consists of two printable parts for the body.
The main body and an insert to help strengthen the nose and transfer forces.
 a) Main Body |  b) Nose Insert |
The fins would ideally be 1.5mm balsa, but I plan to test lightweight PLA (LW-PLA). A DXF is included if you want to laser cut/drag knife the fins.