Demibot ELRS GPS VTX antennae mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AIO mount for generic M80 GPS module, VTX antenna and 2.4gh control link specific to the Demibot frame.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Two versions, the one I use has the cutout to allow the VTX cable to slip into the mount without removing it from the board. I dont like unhooking the UFL if i can get away with it. slip the cable in the side and button it up with a zip tie. the standoffs should hold it closed in the front.
The GPS antenna in use is the HGLRC M80, but there are cutouts to accommodate others.
I may remix this to print in place without supports, but this version needs supports. also, portions of the ELRS mount were inspired by an existing STL, but I dont know where it came from.