Demibot ELRS GPS VTX antennae mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AIO mount for generic M80 GPS module, VTX antenna and 2.4gh control link specific to the Demibot frame.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Two versions, the one I use has the cutout to allow the VTX cable to slip into the mount without removing it from the board. I dont like unhooking the UFL if i can get away with it. slip the cable in the side and button it up with a zip tie. the standoffs should hold it closed in the front.
The GPS antenna in use is the HGLRC M80, but there are cutouts to accommodate others.
I may remix this to print in place without supports, but this version needs supports. also, portions of the ELRS mount were inspired by an existing STL, but I dont know where it came from.