1 / 1
Beer Picnic Tap Holder on Keg
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily stow your picnic tap on your homebrew keg
- Ocena
- 4,833 / 5
- Polubienia
- 52
- Pobrania
- 378
- Wydruki
- 5
- Wyświetlenia
- 1274
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 7)Remiksy (2)Kolekcje (92)Powiązane
I've always wanted a clean and easy way to stow a picnic tap on a keg. Since most keg handles are variable in size your mileage may vary. Printing it on it's side makes for a very strong model but aesthetics not so much. Printing upright has worked fine for me with minor tree supports.
- I highly recommend PETG due to its flexibility. Although I've used PLA+ with success.
- Taking it on and off the keg with the “cup” down works best. In other words, the back goes over the top of the keg handle when installing. Then push down on the cup so you can bring the back off the handle first when removing. This takes the stress off the weakest part of the model.
Please post any makes and toss comments with your experience or recommendations!