JST-SM 1x6 Skirt Connector (ADXL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple ADXL JST-SM plug for voron style skirts.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I wanted a 6-pin JST-SM version of the 4-pin version so I modified the original to fit my adxl345.
Recommended print settings:
Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.
Printable without support
Disclaimer:
This is originally based on https://www.printables.com/model/399596-jst_sm-1x4-skirt-connector-adxl
which is originally based on this mod for a Microfit 2x3 connector.
which has been modified on this mod, to not need supports and to fit a bit tighter on the connector.
I replaced the Microfit 2x3 connector for a JST_SM connector and made the design of this mod fit the jst connector.
