1 / 1
JST-SM 1x6 Skirt Connector (ADXL) — image 1

JST-SM 1x6 Skirt Connector (ADXL)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple ADXL JST-SM plug for voron style skirts.

Rating
0 / 5
Likes
17
Downloads
65
Makes
0
Views
711
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

I wanted a 6-pin JST-SM version of the 4-pin version so I modified the original to fit my adxl345.

Recommended print settings:

Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.

Printable without support

 

Disclaimer:

This is originally based on https://www.printables.com/model/399596-jst_sm-1x4-skirt-connector-adxl
which is originally based on this mod for a Microfit 2x3 connector.
which has been modified on this mod, to not need supports and to fit a bit tighter on the connector.
I replaced the Microfit 2x3 connector for a JST_SM connector and made the design of this mod fit the jst connector.