CR-10S Racquetball feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CR-10S three-bolt racquetball feet
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As you can see in the photo, my CR-10S has three bolts that go directly into threaded holes in the extruded frame. There are two bolts in the 2040 frame, exactly 20mm on centers, and one in the 2020 frame, 35mm (on centers) from the centerpoint between the first two.
The only thing I could find on here with that bolt pattern was for squash balls. As I couldn't find squash balls locally, and was too impatient for amazon, I made one that takes standard racquetballs instead. Racquetballs seem to be cheaper than squash balls, anyway.
The M3 bolts holding on the original feet fit perfectly into mine, no additional hardware needed.
Made in SelfCAD. Supports might not be needed for printing, but I told PrusaSlicer to add them, and it only put a tiny one on each side.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Category: 3D Printer Parts