1 / 6
CR-10S Racquetball feet — image 1
1 / 6

CR-10S Racquetball feet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

CR-10S three-bolt racquetball feet

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
205
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

As you can see in the photo, my CR-10S has three bolts that go directly into threaded holes in the extruded frame. There are two bolts in the 2040 frame, exactly 20mm on centers, and one in the 2020 frame, 35mm (on centers) from the centerpoint between the first two.

The only thing I could find on here with that bolt pattern was for squash balls. As I couldn't find squash balls locally, and was too impatient for amazon, I made one that takes standard racquetballs instead. Racquetballs seem to be cheaper than squash balls, anyway.

The M3 bolts holding on the original feet fit perfectly into mine, no additional hardware needed.

Made in SelfCAD. Supports might not be needed for printing, but I told PrusaSlicer to add them, and it only put a tiny one on each side.

Print Settings

Rafts:

Doesn't Matter

Supports:

Yes

Category: 3D Printer Parts

Tags