Kingroon KP3S filament feeder with Z-axis stabelizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament feeder for the Kingroon KP3S printer, mounted on the top of the Z-axis. With Z-axis stabelizer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The Kingroon KP3S is capable of very fast printing speeds. For this, however, the filament must no longer be fed from the side, otherwise damage to the extruder will occur at higher speeds.
Here is a version for a filament feeder for the Kingroon KP3S printer, which feeds the filament from the top and also supports the mounting of a Z-axis stabilizer.
-Permits the mounting of a ball bearing for the stabilisation of the Z-axis.
-Simply buy the Z-axis stabiliser from the Kingroon homepage and use the supplied ball bearing holder and profile bar fixing screws together with the printed parts (see photo).
-No restrictions in the Z-axis (full print height of 180 mm available).
The two parts are mounted together with two M4x20 screws.
Parts were printed in PLA. 20% infill.