Daiso 5.5L Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Daiso 5.5L filament box/spool holder with space for desiccant
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed around the Daiso 5.5L food storage box and the 608zz bearings. This uses 1" pan head #8 screws (11mm head, 4mm diameter at the threads) to hold the bearings in place and provide additional support. It is held to the sides with VHB tape but does not have long term testing yet. The overall length should be 115mm so if you find something similar it should work as well.
If you can find the box in store it is about $4 and has a latching top with silicone seal dimensions are 29cm x 22.2cm x 11.9cm. I typically drill a hole at the top for a bowden fitting to provide a filament path.
No it does not stand up straight without additional feet.
Tube takes about 2 hours to print
Base takes about 45 minutes each.