Daiso 5.5L Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Daiso 5.5L filament box/spool holder with space for desiccant
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Designed around the Daiso 5.5L food storage box and the 608zz bearings. This uses 1" pan head #8 screws (11mm head, 4mm diameter at the threads) to hold the bearings in place and provide additional support. It is held to the sides with VHB tape but does not have long term testing yet. The overall length should be 115mm so if you find something similar it should work as well.
If you can find the box in store it is about $4 and has a latching top with silicone seal dimensions are 29cm x 22.2cm x 11.9cm. I typically drill a hole at the top for a bowden fitting to provide a filament path.
No it does not stand up straight without additional feet.
Tube takes about 2 hours to print
Base takes about 45 minutes each.