1 / 2
Easier Print of NBR Modder Board Front Cover with Ribbon Cable Stress Relief
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easier print of iListen2Sound's Model of the 'NBR Modder Board Cover' with ribbon cable stress relief.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 446
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
I took iListen2Sound's modified model of the ‘NathanBuildsRobots Modder Board Front Cover’ for the Sprite Extruder (the extra clearance model) and cut some material from the top to make it a flat surface so that it can be easily printed upside-down without supports. I also cleaned up a couple of the faces around the cable guide that I noticed while modifying and after having it installed for a while on my Ender 3 S1 Pro, I believe it still has enough strength for the purpose.