1 / 3
Chappie / Scout 22 / Lucky 13 Bobblehead Remix with fixed earholes — zdjęcie 1
1 / 3

Chappie / Scout 22 / Lucky 13 Bobblehead Remix with fixed earholes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the Chappie / Lucky 13 Bobblehead with proper earholes and slightly undersized ears to account for clearance.

Ocena
0 / 5
Polubienia
58
Pobrania
155
Wydruki
0
Wyświetlenia
1464
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This one is works after printing!
The original remixed model had separate ear blades that fit into the head, but the earholes where the earblades were supposed to fit were partially blocked off.  (Of course, I figured this out after printing the entire model out.)  I messed around with opening up the holes in OpenSCAD or in PrusaSlicer using cylinders, but the earholes are oval.  A bit more thinking took me to using the earblades as a negative volume in PrusaSlicer to open up the holes.  I combined that with shrinking down the ear blades to 99% and the model assembles nicely with a firm press fit.  I used a dab of superglue on each end of the spring.

This model is provided as a 3mf with all the parts on one tray with PrusaSlicer organic supports.  These break away cleanly and easily and leave a clean part behind.  If you want to parts in different color, just turn off the parts (the eyeball icon next to each part in PrusaSlicer) that you don't want to print and slice as normal.

Print instructions

Download.  Slice.  Print.  Repeat if necessary.

How I Designed This

This is a remix of a model that I printed, but couldn't assemble due to a problem with the model (the earblades wouldn't fit into the earholes.)  I opened up the earholes using PrusaSlicer negative volumes.

Actions:

Download

Take this model for a ride on your printer.  

Get Rewarded for Making

Don't forget you can earn Prusameter Rewards (free filament and other cool rewards!) for printing out models and posting a photo of your Make here on Printables.

Modify

If you feel the calling, edit and improve the design and post your results with this model listed as the Remix source.

Feedback

If you have any questions, suggestions, or problems that you'd like to discuss with me, please feel free to message me.  I'm always willing to discuss my models, your ideas, 3-D design, and 3-D printing.

Explore

Check out my other models here on Printables.Com.

Tagi