1 / 3
Bigtree Tech - Filament sensor back cover — zdjęcie 1
1 / 3

Bigtree Tech - Filament sensor back cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dos pour le capteur de fin de filament de la marque Bigtree. --- Back for the Bigtree filament end sensor.

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
154
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Il s’agit d’une conception pour remplacer le dos de votre capteur de fin de filament de la marque Bigtree. La plaque est conçue pour s’adapter au pied de montage du design fait par cmerkle. https://www.printables.com/fr/model/413662-creality-filament-runout-sensor-ball-joint-mount/

Les troues de fixation sont faits serré afin de les filetés lors de l’insertion de la vis pour la première fois. J’ai utilisé des M3x8 pour fixer le support.

Imprimé en PETG

  • 0.2 mm ( 0.4 buse)
  • Remplissage : 15%
  • Aucun support

----------

This is a design to replace the back of your Bigtree brand filament run out sensor. The plate is designed to fit the mounting foot of the design made by cmerkle. https://www.printables.com/fr/model/413662-creality-filament-runout-sensor-ball-joint-mount/

The fixing holes are made tight so that they are threaded when inserting the screw for the first time. I used M3x8 to attach the bracket. 

Printed in PETG 

  • 0.2 mm (0.4 nozzle) 
  • Filling: 15% 
  • No support

Tagi