1 / 3
Bigtree Tech - Filament sensor back cover — image 1
1 / 3

Bigtree Tech - Filament sensor back cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.62 – €0.75 net (excluding VAT)

For file: Bigtree Tech - Filament sensor back cover_47m_0.20mm_230C_PETG_ENDER3V2.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.68 excluding VAT (range midpoint).

Weight reported by the author
7 g
Print time reported by the author
46.8 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Dos pour le capteur de fin de filament de la marque Bigtree. --- Back for the Bigtree filament end sensor.

Rating
0 / 5
Likes
1
Downloads
16
Makes
0
Views
154
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Il s’agit d’une conception pour remplacer le dos de votre capteur de fin de filament de la marque Bigtree. La plaque est conçue pour s’adapter au pied de montage du design fait par cmerkle. https://www.printables.com/fr/model/413662-creality-filament-runout-sensor-ball-joint-mount/

Les troues de fixation sont faits serré afin de les filetés lors de l’insertion de la vis pour la première fois. J’ai utilisé des M3x8 pour fixer le support.

Imprimé en PETG

  • 0.2 mm ( 0.4 buse)
  • Remplissage : 15%
  • Aucun support

----------

This is a design to replace the back of your Bigtree brand filament run out sensor. The plate is designed to fit the mounting foot of the design made by cmerkle. https://www.printables.com/fr/model/413662-creality-filament-runout-sensor-ball-joint-mount/

The fixing holes are made tight so that they are threaded when inserting the screw for the first time. I used M3x8 to attach the bracket. 

Printed in PETG 

  • 0.2 mm (0.4 nozzle) 
  • Filling: 15% 
  • No support

Tags