Everykey belt casing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belt casing for Everykey. Two models are provided, one is single piece, the other two piece.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Belt casing for Everykey. Two models are provided, one is single piece, the other two piece. I started with the two piece design as I wasn't sure how the loops would turn out and how well they would flex. In fact, the loops of the two piece design can be printed using a hard filament, but the casing has to be flexible to allow the Everykey to be pushed in and out. The mushroom heads provide a good mechanical fastening between the two pieces.
Print instructions
Category: Accessories Summary
Belt casing for Everykey. Two models are provided, one is single piece, the other two piece. I started with the two piece design as I wasn't sure how the loops would turn out and how well they would flex. In fact, the loops of the two piece design can be printed using a hard filament, but the casing has to be flexible to allow the Everykey to be pushed in and out. The mushroom heads provide a good mechanical fastening between the two pieces.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.1mm
Infill: 100%
Filament: PolyMaker Flex TPU
Notes:
Supports only needed under the square opening.