Everykey belt casing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Belt casing for Everykey. Two models are provided, one is single piece, the other two piece.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Belt casing for Everykey. Two models are provided, one is single piece, the other two piece. I started with the two piece design as I wasn't sure how the loops would turn out and how well they would flex. In fact, the loops of the two piece design can be printed using a hard filament, but the casing has to be flexible to allow the Everykey to be pushed in and out. The mushroom heads provide a good mechanical fastening between the two pieces.
Print instructions
Category: Accessories Summary
Belt casing for Everykey. Two models are provided, one is single piece, the other two piece. I started with the two piece design as I wasn't sure how the loops would turn out and how well they would flex. In fact, the loops of the two piece design can be printed using a hard filament, but the casing has to be flexible to allow the Everykey to be pushed in and out. The mushroom heads provide a good mechanical fastening between the two pieces.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.1mm
Infill: 100%
Filament: PolyMaker Flex TPU
Notes:
Supports only needed under the square opening.