1 / 2
Fanatec GT DD Pro Magnetic shifter mod with 10x10x3 magnets — zdjęcie 1
1 / 2

Fanatec GT DD Pro Magnetic shifter mod with 10x10x3 magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of https://www.printables.com/model/334865-fanatec-gt-dd-pro-magnetic-shifter-mod with 10x10x3 magnets

Ocena
0 / 5
Polubienia
5
Pobrania
78
Wydruki
0
Wyświetlenia
951
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I printed the quick release part on a 0.6 nozzle with 0.35mm layer height just for the speed. 0.4 nozzle with 0.2mm would do fine too.

The paddle part I printed with a 0.4mm nozzle with 0.15mm layer height, as the top is quite thin. 

I used Polymaker PolyTerra PLA as it's a bit more flexible and should give a longer life. The neodymium magnets are generic ones which can be found on Amazon. They measure 10x10mm (actually slightly less) and have a thickness of 3mm. I used crazy glue but you need to force them into the holes, friction alone should already hold them enough. Warm the PLA a bit to make it easier. Don't heat the magnets as they will loose force I've been told.

First mount the parts for the quick release, you need a slightly longer M4 bolt for that. Then mount the paddle parts using double adhesive tape. 

I used a small piece of velvet foil to dampen the sound of the magnets colliding a bit as not to annoy my family (and I'm racing with headphones anyway)

Like it? Please click the like button and leave me some stars after printing !