Fanatec GT DD Pro Magnetic shifter mod with 10x10x3 magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of https://www.printables.com/model/334865-fanatec-gt-dd-pro-magnetic-shifter-mod with 10x10x3 magnets
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 78
- Makes
- 0
- Views
- 951
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I printed the quick release part on a 0.6 nozzle with 0.35mm layer height just for the speed. 0.4 nozzle with 0.2mm would do fine too.
The paddle part I printed with a 0.4mm nozzle with 0.15mm layer height, as the top is quite thin.
I used Polymaker PolyTerra PLA as it's a bit more flexible and should give a longer life. The neodymium magnets are generic ones which can be found on Amazon. They measure 10x10mm (actually slightly less) and have a thickness of 3mm. I used crazy glue but you need to force them into the holes, friction alone should already hold them enough. Warm the PLA a bit to make it easier. Don't heat the magnets as they will loose force I've been told.
First mount the parts for the quick release, you need a slightly longer M4 bolt for that. Then mount the paddle parts using double adhesive tape.
I used a small piece of velvet foil to dampen the sound of the magnets colliding a bit as not to annoy my family (and I'm racing with headphones anyway)
Like it? Please click the like button and leave me some stars after printing !