Magnet Door Latches for Voron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 magnets per side, 2 on each corner for a stronger latch that fits better because the magnet's are inside the extrusion
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 248
- Wydruki
- 3
- Wyświetlenia
- 2500
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
After making the Magnetic panels with Magnet Inserts by Le0n I decided I really liked his design and wanted to replicate his design for the latches on the front of my 2.4 r2. I did use his design for inspiration, but I did design this from scratch for my printer, it may or may not be what works for yours. You will need to print 2 handle backer's, and 2 of each handle and you will need some VHB tape, I used some I had laying around, but ¼ inch width will be fine. you also need 8 of the 6x3mm magnets, i just used the cheep ones I got from amazon in a 200 pack, but they are not actually 6x3, so I uploaded the STEP and F3D files too if someone want's to modify.
You will also need to print 4 of Le0n's Unhammer nuts to hold in the magnet backer.
I had some problems with the nuts falling out if they self rotated, so I designed it in a way where they kinda lock in when engaged, but that means that you have to put them into the backer before inserting the assembly into the extrusion.