Harbor Freight titanium hex shank drill belt (OpenSCAD/Customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belt to store Harbor Freight titanium hex shank drill bits. Should work with both English and metric sets.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in TPU/Flexible filament. There's a “test” unit of just 3 bit holders to print and test to make sure the fit is correct before you print the larger version.
There are holes to view the bit size as well as small “nubs” to hold the bit securely in the belt. Make sure to print the test piece and adjust the scale so that it's not too tight. The bits should not be “forced” in - otherwise, you're going to have trouble getting them out. Use a small file (or the ¼ drill bit in a drill) and gently remove any extra strings or material to ensure you can insert and remove each bit.
Printed in flexible so it can be rolled up for easier storage.
Can be customized in OpenSCAD for any number of drill bits.