1 / 1
Retching Cat treat Dispenser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The model is composed of a base/stand that houses the bearing, 2 treat containers and an axle that connects to each end.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
- The base slots in with the component that houses a 22mm (diameter) bearing, and can be superglued down.
- The axle is a perfect but tight fit into the 8mm (diameter) hole in the bearing. The ends of the component must be superglued to both containers.
- The containers each have snap fit lids.
- The features that fit onto the containers have specific grooves to slot into, and should be superglued in.
I would consider printing the base, axle and containers in separate food safe filament colours.