1 / 1
Retching Cat treat Dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The model is composed of a base/stand that houses the bearing, 2 treat containers and an axle that connects to each end.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 20
- Makes
- 0
- Views
- 394
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
- The base slots in with the component that houses a 22mm (diameter) bearing, and can be superglued down.
- The axle is a perfect but tight fit into the 8mm (diameter) hole in the bearing. The ends of the component must be superglued to both containers.
- The containers each have snap fit lids.
- The features that fit onto the containers have specific grooves to slot into, and should be superglued in.
I would consider printing the base, axle and containers in separate food safe filament colours.