1 / 6
Besen- und Gerätehalter 22 - 25, selbst fixierend — zdjęcie 1
1 / 6

Besen- und Gerätehalter 22 - 25, selbst fixierend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Selbstverriegelnde Besenstielhalterung Ein robuster und simpel zu druckender Besenstiel- und Gartengerätehalter. Die…

Ocena
5 / 5
Polubienia
38
Pobrania
189
Wydruki
2
Wyświetlenia
2094
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

Selbstverriegelnde Besenstielhalterung

Ein robuster und simpel zu druckender Besenstiel- und Gartengerätehalter. Die Grundkörper sind aus PLA und die Anpressflächen aus TPU.

Ich habe den Halter mit einem Stieldurchmesser von 24 mm und der Einlage mit u= 3 mm im Einsatz und getestet. Für andere Querschnitte habe ich unterschiedliche Einsätze beigelegt. Der Stieldurchmesser sollte >20 und <26 mm sein. Das müsst ihr austesten.

Gebraucht werden:

1x M6 x 30 mm (optional) eine Mutter

2x Schrauben d= < 4 mm je nach Untergrund

Mehr Dinge gibt es hier: https://www.thingiverse.com/hans-g/collections

Self-locking broom handle holder

A robust and easy to print broomstick and garden tool holder. The base bodies are made of PLA and the contact surfaces are made of TPU.

I have used and tested the holder with a stick diameter of 24 mm and the insert with u= 3 mm. For other cross-sections I have included different inserts. The stem diameter should be >20 and <26 mm. You have to test this.

Needed are:

1x M6 x 30 mm (optional) one nut

2x screws d= < 4 mm depending on the surface

There are more things here: https://www.thingiverse.com/hans-g/collections

Translated with www.DeepL.com/Translator (free version)

Print Settings

Printer:

Artillery Sidewinder X1

Rafts: 

Yes

Supports:

No

Resolution: 

0,2

Infill:

10%

Filament:

no name PLA / TPU 

Doesn't Matter


 

Notes:

 

Weicheres TPU ist für die Haftung von Vorteil.
Softer TPU is advantageous for adhesion.

How I Designed This

 

 

 

Category: Organization

Tagi