Besen- und Gerätehalter 22 - 25, selbst fixierend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Selbstverriegelnde Besenstielhalterung Ein robuster und simpel zu druckender Besenstiel- und Gartengerätehalter. Die…
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 189
- Makes
- 2
- Views
- 2,094
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Selbstverriegelnde Besenstielhalterung
Ein robuster und simpel zu druckender Besenstiel- und Gartengerätehalter. Die Grundkörper sind aus PLA und die Anpressflächen aus TPU.
Ich habe den Halter mit einem Stieldurchmesser von 24 mm und der Einlage mit u= 3 mm im Einsatz und getestet. Für andere Querschnitte habe ich unterschiedliche Einsätze beigelegt. Der Stieldurchmesser sollte >20 und <26 mm sein. Das müsst ihr austesten.
Gebraucht werden:
1x M6 x 30 mm (optional) eine Mutter
2x Schrauben d= < 4 mm je nach Untergrund
Mehr Dinge gibt es hier: https://www.thingiverse.com/hans-g/collections
Self-locking broom handle holder
A robust and easy to print broomstick and garden tool holder. The base bodies are made of PLA and the contact surfaces are made of TPU.
I have used and tested the holder with a stick diameter of 24 mm and the insert with u= 3 mm. For other cross-sections I have included different inserts. The stem diameter should be >20 and <26 mm. You have to test this.
Needed are:
1x M6 x 30 mm (optional) one nut
2x screws d= < 4 mm depending on the surface
There are more things here: https://www.thingiverse.com/hans-g/collections
Translated with www.DeepL.com/Translator (free version)
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
Yes
Supports:
No
Resolution:
0,2
Infill:
10%
Filament:
Doesn't Matter
Notes:
Weicheres TPU ist für die Haftung von Vorteil.
Softer TPU is advantageous for adhesion.
How I Designed This
Category: Organization