1 / 2
Sprite Sylph V2.1 with heat-set inserts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V2.1 of the Sprite Sylph cooler, but with heat-set inserts for those who prefer it.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Same instructions as the original model, just with heat-set inserts where you'd otherwise be screwing into plastic. Here are the locations of all the inserts:
- Heatbrake fan shroud:
- Two on side where cable strap screws in
- One on bottom where cooling duct screws in
- Part cooling fan shroud:
- Two on side where cable strap screws in
- Cooling duct:
- One on side where part cooling fan shroud screws in
- Backplate:
- Two on side where ABL screws in (be sure to get these flush and perpendicular)
- One on bottom where cooling duct screws in
I've included the cooling duct both with and without Neopixel mount.