1 / 2
Sprite Sylph V2.1 with heat-set inserts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V2.1 of the Sprite Sylph cooler, but with heat-set inserts for those who prefer it.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 394
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Same instructions as the original model, just with heat-set inserts where you'd otherwise be screwing into plastic. Here are the locations of all the inserts:
- Heatbrake fan shroud:
- Two on side where cable strap screws in
- One on bottom where cooling duct screws in
- Part cooling fan shroud:
- Two on side where cable strap screws in
- Cooling duct:
- One on side where part cooling fan shroud screws in
- Backplate:
- Two on side where ABL screws in (be sure to get these flush and perpendicular)
- One on bottom where cooling duct screws in
I've included the cooling duct both with and without Neopixel mount.