Anti-vibration feet for Original Prusa i3 MK3 ENCLOSURE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After building the Ikea Lack enclosure for my MK3 and adding schuetzi99's Anti Vibration Feet…
- Ocena
- 4,8 / 5
- Polubienia
- 86
- Pobrania
- 362
- Wydruki
- 13
- Wyświetlenia
- 4754
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After building the Ikea Lack enclosure for my MK3 and adding schuetzi99's Anti Vibration Feet (https://www.prusaprinters.org/prints/1727-anti-vibration-feet-for-prusa-i3-mk3s), I still noticed some disturbing noise, especially during fast movements of the y-axis.
I designed this simple Squash Ball Holder (based on the general idea of Mike's Simple Squash Ball damper https://www.prusaprinters.org/prints/13720-simple-squash-ball-damper) for the feet on the lower table. I use "double yellow," so very slow and soft for the squash balls, like these: https://www.amazon.de/dp/B004E8N2LS/ref=cm_sw_em_r_mt_dp_KLJDFb156GE7G.
The feet did the trick for me. The printer is now virtually unnoticeable, and the table is still sufficiently stable overall.
Print instructions
Printed in Prusa PETG, 0,2mm quality setting.