1 / 4
Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Fan Duct for the P1Ps MB fan - holds with friction fit but can be secured with a single M3x6 screw
- Ocena
- 4,25 / 5
- Polubienia
- 50
- Pobrania
- 375
- Wydruki
- 3
- Wyświetlenia
- 4165
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 21)Remiksy (1)Kolekcje (127)Powiązane
Print from a temperature resistant material, PLA is not suitable - use PTEG, ASA or ABS for example.
Note: measure your heatsink, the older models are 18 mm wide, the newer models 20 mm