TUSH Grippy Stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little stabilizer for the TUSH standalone roller; sized for a grippy stick-on pad from Amazon.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently printed some TUSH rollers for use when I didn't want to load up one of my dryboxes with filament. They're elegant, but the stability leaves something to be desired. I saw a stabilizer foot on Printables (credit at bottom) and thought it was clever. I wanted to make sure the rollers didn't slide around during use. I had some non-slip pads on hand from a different project (non-affiliate link), so I designed my stabilizer around these. As designed, it was a nice snug slip fit. Might need a drop of glue or a bit of scale-up if it's not fitting right for you!
I printed these in PLA; I think you can do whatever and print them at whatever layer/infill/perimeter 😀. Just print them as downloaded and not rotated.
This design was inspired by Wizavich's TUSH Stabiliser. However, I designed my version from scratch, so I'm uploading it as an original and not a remix.