Sapphire Plus SP-5 Gantry Repaired
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original SP-5 Gen2 gantry are made some big mistake.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 1647
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
how you see from photo, are only about 3mm between rollers, WTF? Im asking myself, to get belts parallel must be 14mm or you get issue when make belts tight and X axis carriage are in position min, moving to max no possible, or if you tight belts in max position and then move to min, your belts are louse. This will make your carriage moment and sound loud grinding.
Im adding also step file to can edit if need. Also have some small brackets “Beta test” included if you want move to carbon tube.
Problem are only for Gen2, not for latest Gen3 how far i know, i don't have idea about Gen1.
Gen1 have only one driver for z axis but with belt synch
Gen2 have dual z axis without belt sync and coming with 4988 steppers.
Gen3 have z axis with belt and tmc2225 (some cases tmc2209)