P
Printablesbkgoodman
ESP32-CAM Case
Has cutouts for illumination LED and camera, as well as buttons on the side for the two buttons on-board.
- Pobrania
- 14 293
- Polubienia
- 648
- Ocena
- 4,7
Wyniki wyszukiwania: sp3
2535 modeli
P
PrintablesPLAUK
ESP32-WROOM-32 (USB-C) Box with Lid
ESP32-WROOM-32 Box (USB-C) A small box with snap-fit removable lid for the ESP32-WROOM-32 development board. Pins are still accessible from the underside via two slots. Please note this is for the 28mm x 52mm (approx.) PCB, this is the…
- Pobrania
- 8774
- Polubienia
- 752
- Ocena
- 5
P
PrintablesPredy
ESP32 Case
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic Case for ESP32 dev board No screws required Ventilation openings Can be mounted without unplugging the circuit board Includes housing with and without pin…
- Pobrania
- 7779
- Polubienia
- 853
- Ocena
- 4,96
P
PrintablesMihai
esp32-case
OpenSCAD sedigned case for the esp32 development board. Thanks to Sergio Vilches for the rounded corners!
- Pobrania
- 6496
- Polubienia
- 558
- Ocena
- 4,75
P
Printablesbkgoodman
ESP32 Devkit V1 "Chunky" Case
ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection. IF you want a version…
- Pobrania
- 5306
- Polubienia
- 185
- Ocena
- 4,68
P
PrintablesMarius M
CASE ESP32 2432S028 USB-C Module - Cheap Yellow Display (CYD) / CYD2USB
Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.
- Pobrania
- 4804
- Polubienia
- 261
- Ocena
- 4,91
P
PrintablesJosselin Hefti
ESP32 C3 Super mini MODEL
ESP32 C3 Super mini 3D MODEL - .STEP - .f3z
- Pobrania
- 4582
- Polubienia
- 167
- Ocena
- 5
P
PrintablesMichal Fanta
ESP32 camera case
This case is intended for the Articulated arm mounted on the Original Prusa printer.
- Pobrania
- 4461
- Polubienia
- 802
- Ocena
- 4,93
P
Printablesbriancmoses
ESP32 D1 Mini Case
I was inspired to design this ESP32 D1 Mini case after writing a blog about using the ESP32 D1 Mini and ESPresense to incorporate room-specific presence detection in my Home Automation . After using someone else's design, I thought it'd…
- Pobrania
- 3805
- Polubienia
- 365
- Ocena
- 4,92
P
Printablesjcvg
ESP32 C3/C6/H2/S3 Super Mini Case
A basic case for ESP32 Super Mini boards. Lid clicks in place quite firmly. With optional pass-through for wires. Most Super Mini boards have 18x23 mm dimension, some are slightly longer. 23mm and 24mm are available here, use the OpenSCAD…
- Pobrania
- 3345
- Polubienia
- 269
- Ocena
- 4,88
P
Printablesaqab0N
ESP32 Cam Case
I got inspired by https://www.printables.com/model/286528-cam-case-for-esp-32-wifi-cam Unfortunately, the files that come with it are unusable and thus I started to design my own. The whole assembly is a tight fit to ensure a good…
- Pobrania
- 3113
- Polubienia
- 472
- Ocena
- 4,76
P
PrintablesRauks
Minecraft Ore Lamp (WLED / ESP32 D1 Mini USB-C)
A Minecraft Ore Lamp powered by a USB-C ESP32 D1 Mini and a WS2812B LED Ring , running WLED for full RGB lighting control. Bill of Materials The lamp was designed to perfectly fit the following components: USB-C ESP32 D1 Mini from…
- Pobrania
- 3049
- Polubienia
- 1414
- Ocena
- 4,85
P
Printablesmdkendall
Enclosure for Sunton ESP32-2432S028R Cheap Yellow Display
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
- Pobrania
- 3032
- Polubienia
- 218
- Ocena
- 4,79
P
PrintablesThe Stock Pot
Everything Remote - ESP32 Powered Universal Remote
🎉🎉 PARTS KITS ARE NOW AVAILABLE HERE 🎉🎉 Build your own universal smart remote! This project turns a simple ESP32 and tactile buttons into a powerful, battery-powered remote for Home Assistant — perfect for media control, lights, scenes…
- Pobrania
- 2908
- Polubienia
- 3463
- Ocena
- 4,83
P
Printablesrowboatsect
ESP32 Case
The original had some odd open space so I closed that up. It should snap fit but if not a little piece of tape or a dab of glue will do. This is my favorite case for ESP32's that don't have anything connected to the pins.
- Pobrania
- 2831
- Polubienia
- 270
- Ocena
- 4,88
P
Printablesjeepers01
ESP32 2.8inch Touch IPS CYD LCD Screen Case
ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…
- Pobrania
- 2771
- Polubienia
- 136
- Ocena
- 4,6
P
PrintablesTeraflop
Teyleten Robot ESP32-S3-WROOM-1 Case
This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…
- Pobrania
- 2589
- Polubienia
- 168
- Ocena
- 4,9
P
PrintablesLaisch
ESP32 Cam housing
Housing for ESP32 Cam modul (Tinker board) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,2 Infill: 100% Notes: After printing you can use female breadboard connectors with the plastic…
- Pobrania
- 2488
- Polubienia
- 278
- Ocena
- 4,19
P
PrintablesTecknishen
ESP-WROOM-32 ESP32 Case
Case for ESP-WROOM-32 ESP32. The lid snaps on without any screws or glue and has openings for pressing the buttons with a paperclip. The base is deep enough to keep the headers on the board, although I de-soldered mine. There is an…
- Pobrania
- 2462
- Polubienia
- 167
- Ocena
- 4,17
P
PrintablesGrunt
ESP32-WROOM-32D Dupont Case
This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…
- Pobrania
- 2369
- Polubienia
- 208
- Ocena
- 4,67
P
Printablesmaggoh
Presence Sensor Case - ESP32 C3 Super Mini + LD2410C Radar mmWave Sensor for smart home
Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…
- Pobrania
- 2341
- Polubienia
- 241
- Ocena
- 5
P
PrintablesTheProjectWheel
Case for ESP32-C3 SuperMini and LD2410C
Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…
- Pobrania
- 2310
- Polubienia
- 271
- Ocena
- 5
P
Printablesregularfry
ESP32-Devkit case
I'm using these esp32-devkit boards as ESPresense sensors: https://www.amazon.co.uk/gp/product/B08LGNV6V6 I just wanted a box I could put them in so I didn't have bare electronics around the house, and I couldn't be bothered ordering some…
- Pobrania
- 2278
- Polubienia
- 291
- Ocena
- 4,81
P
PrintablesjohnyHV
esp32-cam OV2640 focus adjustment wrench
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
- Pobrania
- 2166
- Polubienia
- 99
- Ocena
- 4,69
P
PrintablesJosselin Hefti
ESP32 DEVKIT V1 BOARD 30 PIN
ESP32 DEVKIT V1 BOARD 30 PIN: STEP F3D PARAMETRIC MODEL: USB C OR MICRO USB B WITH PIN OR WITHOUT PIN
- Pobrania
- 1998
- Polubienia
- 35
- Ocena
- 0
P
PrintablesMan-in-Black
ESP32 case for ESP-WROOM-32D
I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.
- Pobrania
- 1928
- Polubienia
- 140
- Ocena
- 5
P
PrintablesScottyDoesKnow
XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera)
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
- Pobrania
- 1786
- Polubienia
- 127
- Ocena
- 5
P
PrintablesMichał
ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R)
Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…
- Pobrania
- 1746
- Polubienia
- 127
- Ocena
- 4,95
P
PrintablesFyrby Additive
Seeed Studio XIAO ESP32C3
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
- Pobrania
- 1738
- Polubienia
- 49
- Ocena
- 4,75
P
PrintablesZdendys
ESP32 CAM Rover with robotic arm
Modified stair climbing rover to carry a robotic arm. Mounting is in the lower frame, servos are rotated 90°, covers and frame have cutouts for the robotic arm. The ESP32 CAM with external antenna is mounted in the top cover, through…
- Pobrania
- 1696
- Polubienia
- 801
- Ocena
- 5
P
Printablesnicolas0071998
Seeed XIAO ESP32-S3 Case
Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…
- Pobrania
- 1686
- Polubienia
- 113
- Ocena
- 4
P
PrintablesFibonachio
Esp 32 Gehäuse esp32 case
Ein einfaches Schutzgehäuse für den Esp 32 mit dem Vorteil das die Pinout Belegung noch ablesbar ist.
- Pobrania
- 1615
- Polubienia
- 89
- Ocena
- 5
P
PrintablesSergey Morozov
Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case
You shoul use a 4 M3x10 screws to secure a screen to the case.
- Pobrania
- 1571
- Polubienia
- 56
- Ocena
- 5
P
PrintablesMatt Wilde
Case for Sunton ESP32-2432S028 2.8" TFT-Touch Board
This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…
- Pobrania
- 1550
- Polubienia
- 96
- Ocena
- 5
P
Printableskachurovskiy
ESP32-S3 devkit
Model of the commonly used ESP32-S3 devkit to be used when designing cases, devices, etc.
- Pobrania
- 1539
- Polubienia
- 34
- Ocena
- 5
P
PrintablesPaul Arden
ESP32 CAM Case With Tripod Mount
Remix of the ESP32 Cam case by mojocorp . I really like their design, however I wanted the following. Printable without supports Room for Dupont connectors Tripod mounting hole Increased rear rim thickness The shape of the original looks…
- Pobrania
- 1516
- Polubienia
- 115
- Ocena
- 4
P
Printablesnsty
Holder/case for ESP32-C3 with OLED display
I needed a small case for this particular ESP32-C3 board offered with integrated OLED display on AliExpress. I use it as a cheap, tiny display with ESPHome and Home Assistant to present small amounts of sensor data directly at the…
- Pobrania
- 1477
- Polubienia
- 116
- Ocena
- 5
P
PrintablesTecknishen
Seeed Studio XIAO-ESP32-S3 Case
This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…
- Pobrania
- 1412
- Polubienia
- 117
- Ocena
- 4,8
P
PrintablesAndreas Gohr
ESP32 DevKit V4 Case (OpenScad)
I couldn't find a ready made case for the type of ESP32 I had ordered, so I made my own. This fits a 38 pin version of the ESP32-Wroom-32D with built-in antenna, labelled DevKitc V4. There are two versions of the body: a thick version…
- Pobrania
- 1404
- Polubienia
- 64
- Ocena
- 5
P
Printablesbkgoodman
ESP32 Devkit V1 Case
Case with Snap-on lid. Lid has detents for buttons. Case has cutouts for USB, LEDs and pins will stick out of back of case. If you want a version of this case where the pins are fully shelled/enclosed - see:…
- Pobrania
- 1390
- Polubienia
- 112
- Ocena
- 5
P
PrintablesJones
Sól: OpenDTU (ESP32 / NRF24L01+) case
I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…
- Pobrania
- 1350
- Polubienia
- 70
- Ocena
- 5
P
PrintablesSeeed Studio
3D Model for Seeed Studio XIAO ESP32C6
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
- Pobrania
- 1322
- Polubienia
- 29
- Ocena
- 0
P
PrintablesSuchit Mehrotra
ESP32 DEVKITV1 ESP32 WROOM Case 2 in 1
This case can be used to store or actively use ESP32 DEVKITV1 or ESP32 WROOM The bottom holes are to push the ESP32 Board out of the socket. Also ,the top can be mesh for better heat dissipation. NOTE : For the version with buttons use…
- Pobrania
- 1261
- Polubienia
- 110
- Ocena
- 4,6
P
PrintablesAneoPsy
ESP32-Wroom Box
ESP32 Wroom Box Close with snap clips (press fit) Please be sure about the ESP32 board size: 26x52mm Different manufacturers have different board sizes. BENEFITS: Fast to print Easy to use Small & Strong Designed for FDM Printing Smooth…
- Pobrania
- 1243
- Polubienia
- 188
- Ocena
- 4,67
P
PrintablesLoiseau créatif
ESP32-WROOM-32U Casing
ESP32-WROOM-32U Based WiFi Repeater Utilizes the ESP32-WROOM-32U module for powerful WiFi repeating capabilities. Enhanced signal strength with an external antenna (IPEX connector) for optimal performance. Firmware based on ESP32 NAT…
- Pobrania
- 1219
- Polubienia
- 82
- Ocena
- 5
P
Printablesxtf
LEGO Technic - Ferrari Daytona SP3 (42143) Wall Mount
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
- Pobrania
- 1218
- Polubienia
- 98
- Ocena
- 5
P
Printablessirprintalot
ESP32 NodeMCU Dev Kit C Case
Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…
- Pobrania
- 1208
- Polubienia
- 119
- Ocena
- 5
P
Printablescrazeeeyez
Heltec ESP32 Lora V3 Case
I took the previous model and updated it for the newer USB-C connection and made room for an antenna on the case.
- Pobrania
- 1157
- Polubienia
- 86
- Ocena
- 4,6
P
PrintablesMagnusT
Smallest possible ESP32-CAM
The ESP32-CAM enables you to build a complete webcamera and is available from under five bucks! Here's some great info from someone on youtube https://www.youtube.com/watch?v=MicAM_A0_lU There are a bunch of ESP32-CAM cases available…
- Pobrania
- 1146
- Polubienia
- 158
- Ocena
- 4,67
P
PrintablesThomas V
ESP32 Case
I got myself some ESP32 to use as a bluetooth proxy in Home Assistant and needed a case for them. The ones I found online were not really what I was looking for or weren't for the board version I got. So I designed a case myself. It is a…
- Pobrania
- 1129
- Polubienia
- 91
- Ocena
- 4,67
P
Printablesaamott
ESP32 Cheap Yellow Display (CYD) Enclosure with Pen Holder
I loved the original design, but I wanted a holder for the little touch pen that came with my USB-C CYD. Here's the result! Requires 2-4 M3x6 screws. Socket-head fit flush, but others will still work. I'll add an adjustable 2020 extrusion…
- Pobrania
- 1128
- Polubienia
- 102
- Ocena
- 5
P
PrintablesAlexander
Gridfinity ESP32 Holder
Just a simple gridfinity bin for storing ESP-WROOM-32 devboards. You can download the STL if you just want to print it easily, or the negative stamp if you want to replace the base gridfinity bin with a different version (like one without…
- Pobrania
- 1102
- Polubienia
- 217
- Ocena
- 5
P
PrintablesJamehz
ESP32 Project Enclosure with OLED SSD1306 0.96"
Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…
- Pobrania
- 1088
- Polubienia
- 64
- Ocena
- 5
P
PrintablesReitangle
ESP32 38 pin breakout board case (snap-fit lid)
Designed this case with a snap-fit lid to fit a 38 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…
- Pobrania
- 1074
- Polubienia
- 40
- Ocena
- 5
P
PrintablesRynok
ESP32-WROOM-32 (USB-C) Box with Lid, Trimmed
Snap-fit closure for ESP32 board, with pins available for prototyping purposes. This remix of the existing model removes the material between the pins inside the box. Printed beautifully using Inland PLA+ with a 0.5mm nozzle at a 0.28…
- Pobrania
- 1070
- Polubienia
- 91
- Ocena
- 4,8
P
Printablesmilans
ESP32 CAM case / enclosure / mount using modular mounting system
Fits the AZDelivery ESP32 Cam Module Board. There's a good chance other branded boards also fit. Snap fit enclosure Enclosure has holes for the ESP32 cam board pins to hold it in place Use some glue or double sided tape to attach the…
- Pobrania
- 1043
- Polubienia
- 89
- Ocena
- 5
P
Printablesunhild
Meshtastic Seeed Studio XIAO ESP32S3 & Wio SX1262 case
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
- Pobrania
- 1034
- Polubienia
- 143
- Ocena
- 5
P
PrintablesRoss Peters
Scout32 ESP32 WiFi FPV Camera Rover
Due to the large number of files, they are archived in zip format to preserve folder structure. Notes, Fixes, and things I forgot to include in this release. I forgot to include the decorative cab plating in the ScoutXL files. Please use…
- Pobrania
- 1034
- Polubienia
- 172
- Ocena
- 5
P
PrintablesAndroxilogin
ESP32-CAM with ESP32-CAM-MB Housing
So I bought a few ESP32-CAM & ESP32-CAM-MB boards with those cheapo 3MP OV2640 lenses for simple uses, such as seeing when the mailman comes. If you'd like other options than the simple example code offers from the Arduino IDE and SD card…
- Pobrania
- 1014
- Polubienia
- 66
- Ocena
- 4,5
P
Printablesmorozgrafix
Snap-fit case for Seeed Studio XIAO ESP32S3
Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…
- Pobrania
- 1002
- Polubienia
- 78
- Ocena
- 4,67
P
PrintablesGazB
ESP32-WROOM-32D Dev Board Model (Parametric - Fusion 360)
I needed this to design a case for a WLED board so thought I'd upload it for others. It's Parametric (has parameters you can change for every measurement) so you can easily tweak it for your specific board. Hide the aerial if it doesn't…
- Pobrania
- 1002
- Polubienia
- 21
- Ocena
- 5
P
PrintablesTijmen
ESP32 CAM Mount
Small and quick to print camera mount for the ESP32 Cam. This mount uses the pins of the esp board to hold the board. The pinholes in the corners are snugger, to secure the board in place. Additionally, the 5v and gnd are left open for…
- Pobrania
- 996
- Polubienia
- 175
- Ocena
- 4,79
P
Printablesespn8-theocho
Roomy ESP32 Enclosures
There is plenty of ESP32 board enclosures out there, but most of them are quite streamlined/minimalistic, which is fine but I set out to buid an enclosure with a little more room in it so you can easily use breadboard jumpers instead of…
- Pobrania
- 982
- Polubienia
- 126
- Ocena
- 5
P
Printablesscross01
Slim case for ESP32-C3 Super Mini
This is a slim case for ESP32-C3 Super Mini Development Board. Ideal case for a small Home Assistant Bluetooth proxy. This is designed specifically to fit these ESP32-C3 Super Mini boards I purchased from AliExpress based on the board…
- Pobrania
- 979
- Polubienia
- 84
- Ocena
- 5
P
PrintablesSMaker3D
ESP32 Cam Mount
With this small camera holder you can mount an ESP32CAM directly together with the lens and align it freely. In my case, I mounted this bracket in the housing above my 3D printer to monitor the printing. The module is very inexpensive and…
- Pobrania
- 965
- Polubienia
- 169
- Ocena
- 4,89
P
Printablesjonnybergdahl
Case for ESP32-2432S028R (AKA Cheap Yellow Display)
I needed a case for the CYD (Cheap Yellow Display) that was thin enough to use 180° USB adapters. The existing cases was too thick so I designed my own one. The case have a cutout for the RGB LED on the backside and “buttons” for the…
- Pobrania
- 963
- Polubienia
- 75
- Ocena
- 5
P
Printablesrosch8
Internetradio YoRadio esp32
EDIT5: Added speaker membrane left, right boxes and panel. I divided this boxes to box and panel to print it without support and Both boxes have closed box space and on back panek hole for passive mebrane 3". it improves bass…
- Pobrania
- 958
- Polubienia
- 60
- Ocena
- 4,25
P
Printablesgeokscott
ESP32 16x2 LCD LoRa Case / Enclosure
Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…
- Pobrania
- 950
- Polubienia
- 50
- Ocena
- 5
P
Printableshackerbijay
DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD)
DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD) Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: self made PLA 1.75 White Notes: nozzle 0.8, print speed 50 Category: DIY
- Pobrania
- 940
- Polubienia
- 179
- Ocena
- 5
P
Printables3dloh
Case for ESP32-Camera with USB shield
This is a remix from https://www.thingiverse.com/thing:3463679 . Thanks mojocorp for the great case design. I added a GoPro type mounting as described in https://www.thingiverse.com/thing:4072374 and I extend the case to fit for a ESP32…
- Pobrania
- 937
- Polubienia
- 58
- Ocena
- 5
P
PrintablesSeeed Studio
3D Model for Seeed Studio XIAO ESP32S3 Sense
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
- Pobrania
- 917
- Polubienia
- 27
- Ocena
- 0
P
PrintablesNicopetru
ESP32 Breadboard
Breadboard for esp32 Since I have the ESP32 and try to build circuits I have problems because I only have one free space left to connect to the standard breadboard. So I decided to make a version so that it's in the first column and free…
- Pobrania
- 906
- Polubienia
- 132
- Ocena
- 4,83
P
PrintablesRobertoooo
Guition ESP32-S3-4848S040 EU wall mount
This is a wall mount for Guition ESP32-S3-4848S040 ESP32-S3 based touch screen, which can be purchased without the relay base. The relay base doesn't fit in a standard 60mm diameter appliance wall box, so if one doesn't really need the…
- Pobrania
- 887
- Polubienia
- 53
- Ocena
- 0
P
PrintablesTheProjectWheel
Case for ESP32 S2 Mini and LD2410C
Please comment, rate, and post a make! Update 1/19/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with…
- Pobrania
- 885
- Polubienia
- 106
- Ocena
- 4,75
P
Printablesmarcusone
Sunton ESP32S3 8048s043c 4.3" Screen Case
Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…
- Pobrania
- 881
- Polubienia
- 29
- Ocena
- 5
P
PrintablesMarius Barkauskas
ESP32 C3 Super Mini tiny case
The ESP32 C3 Super Mini case is designed to be as small as possible for boards without soldered pins. Tolerances are quite tight. The ESP32 and lid close tightly, without any wobbling or rattling. I designed this case because I needed one…
- Pobrania
- 866
- Polubienia
- 79
- Ocena
- 4,8
P
PrintablesVagnPetersen
Box for Seeed Studio Xiao-esp32c3
The box is made of 3 parts and the cover and carrier are universal for whatever base will be used. The base is specific designed to house an LD2410C sensor.
- Pobrania
- 855
- Polubienia
- 88
- Ocena
- 3,5
P
PrintablesMakerMeik
ESP32-Presense - ESP32-Devkit case with ventilation slots
This is a remix of the case from @regularfry . I just added some vents because the ESP32 gets quite warm when running as with the Espresense firmware. Here is the description of @regularfry , which is also true for me: I'm using these…
- Pobrania
- 847
- Polubienia
- 74
- Ocena
- 4,88
P
PrintablesDavid
ESP32-S3 EYE camera cover / mount
ESP32-S3-EYE camera module cover. Mounts onto a 16mm ball hinge plumbus such as this one: https://www.printables.com/model/742987-rpi-camera-holder-plumbus Or onto various other RPi camera mounts , such as the Sneaks's Articulating RPi…
- Pobrania
- 847
- Polubienia
- 106
- Ocena
- 4,79
P
PrintablesXav83
Simple ESP32 CAM Mount
Simple ESP32 CAM Mount Easy to use and place on the printer's metal frame. Designed for the XL, but can be used on other models. Equipment required: neodymium magnet: 10x5mm quantity: 2 Screw: M3x25mm quantity: 1 Nut: M3: quantity: 1 I…
- Pobrania
- 843
- Polubienia
- 82
- Ocena
- 5
P
Printablesarminth
Case for Wemos ESP32 D1 Mini
I have designed a small, handy case for the WEMOS ESP32 D1 Mini version. Board just snaps in place (start with the USB-port when inserting) You need 4 M3x6 screws to fix the lid. There are two versions of the lid: Version 1 for directly…
- Pobrania
- 839
- Polubienia
- 106
- Ocena
- 5
P
PrintablesCosmicNimbus
ESP32 cam enclosure
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi there ! This is a remix of an ESP32 cam enclosure I found and linked in this upload. It makes space for a the ESP32 cam that I…
- Pobrania
- 834
- Polubienia
- 96
- Ocena
- 4,86
P
PrintablesThatGuy
ESP32-S3 ESPHome voice assistant with local wake word
For more info about this project, please have a look at my blog post .
- Pobrania
- 827
- Polubienia
- 407
- Ocena
- 3,67
P
PrintablesThe Craft & Pixel Pulse Lab
ESP32-S3 CAM Case SnapFit
Simple Case Model, modify mounts or holes in slicer.
- Pobrania
- 826
- Polubienia
- 30
- Ocena
- 5
P
Printablessermelo
ESP32 case for WLED
ESP32 case designed to incorporate a microphone and connect to a leds strip. This was specifically designed to sound reactive WLED . 4 M2 bolts are needed to mount the ESP32 PCB, but nothing is needed to close the case.
- Pobrania
- 820
- Polubienia
- 121
- Ocena
- 5
P
Printablesphsete
ESP32-C6-DEVKIT-M-1 Case
Print both the lid and the body. The ESP32-C6-DEVKIT-M-1 can be pressed in and should be held in by friction. The tolerances are designed for this purpose. I printed it on my Ender 3 with Prusament PLA Galaxy Black and 0.2mm Layer Height…
- Pobrania
- 818
- Polubienia
- 32
- Ocena
- 4
P
PrintablesDDRBoxman
Olimex ESP32 POE ISO Case
Case for the Olimex ESP32 POE ISO Remixed from https://www.thingiverse.com/thing:4860626 by Bram Gerritsen
- Pobrania
- 809
- Polubienia
- 42
- Ocena
- 4,67
P
Printablesd4l3k
ESP32 Relay X2 Case
This is a case for the Walfront ESP32 2 Channel 5V Relay Module 4M Byte Flash Large Capacity Programmable Relay Board for Secondary Development Learning…
- Pobrania
- 801
- Polubienia
- 33
- Ocena
- 5
P
PrintablesEpik
Mini Pan-Tilt ESP32-CAM
Note: the front piece should have air holes to aid in cooling, but I have not yet had a chance to remix and test. A simple case for the ESP32-CAM that clips to the Adafruit Mini Pan-Tilt Kit ( assembled with servos ). All pieces snap…
- Pobrania
- 798
- Polubienia
- 83
- Ocena
- 5
P
PrintablesSeeed Studio
3D Model for Seeed Studio XIAO ESP32-C3
Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.…
- Pobrania
- 795
- Polubienia
- 26
- Ocena
- 4
P
PrintablesHarukiToreda
Hel-Txt - Standalone Meshtastic communicator (Heltec ESP32 V3/V2)
***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…
- Pobrania
- 770
- Polubienia
- 176
- Ocena
- 5
P
PrintablesRames The Generic
XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera) with Vive Facial Tracker Mount
Remixed with the intention to use the Xiao Sense camera as a facial tracker with Project Babble.
- Pobrania
- 768
- Polubienia
- 50
- Ocena
- 5
P
PrintablesAlejandro Esteban Flores Muñoz
Esp32 C3 mini + LD2450
Descripción: Este soporte ha sido diseñado para montar un ESP32-C3 Mini junto con un sensor LD2450 de manera compacta y eficiente. El diseño incluye una base redonda ajustable con sistema giratorio que permite orientar el sensor con…
- Pobrania
- 767
- Polubienia
- 62
- Ocena
- 4,75
P
PrintablesDavid Smith
Waveshare ESP32-S3 7inch Capacitive Touch Display - Tabletop case
The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. Here is the link to the design in Onshape:…
- Pobrania
- 767
- Polubienia
- 30
- Ocena
- 5
P
PrintablesDoelmm
ESP32 Marauder Case
I decided to make a enclosure for Marauder, just so you guys won't need to do it yourself. The case includes ports (I have used C-Type, but it should be good for Micro as well) other one is made for battery module, C-type aswell, you can…
- Pobrania
- 758
- Polubienia
- 47
- Ocena
- 0
P
Printablesjacek
ESP32 Case Snap-Fit with DIN-Rail mount (Joy-It Devboard)
Edit 29.09.2022: I added an improved top cover with integrated buttons (no longer losing those tiny parts!), similar to the Prusa mk3s reset button. Also added holes for LED where the LEDs actually are - the old one had a hole for viewing…
- Pobrania
- 757
- Polubienia
- 72
- Ocena
- 5
P
PrintablesBlushTTV
ESP32 Marauder CYD / Cheap Yellow Display 2.8
Ein Gehäuse für den Marauder auf Basis von einem CYD Display mit externer oder Interner GPS Antenne mehr infos dazu unter meinem Github A housing for the Marauder based on a CYD display with external or internal GPS antenna more info on…
- Pobrania
- 747
- Polubienia
- 64
- Ocena
- 4
P
PrintablesMNKmakes
Arduino & ESP32 prototype board | Gridfinity compatible
This prototyping board is designed for Arduino and ESP32 development. It fits both a large and a small breadboard, providing a compact and organized workspace for your electronics projects. Whether you're testing circuits or building…
- Pobrania
- 744
- Polubienia
- 447
- Ocena
- 0
P
PrintablesFuWeissinger
ESP32 Wemos D1 Case with BMP280 sensor mount
I use this case as a sensor box for ESP32 Wemos D1 from AZDelivery with an BMP280 sensor. Wemos itself has no screws so its laying just inside. The distance between the holes is 10mm, which seems to be suitable for many types of sensors.…
- Pobrania
- 738
- Polubienia
- 95
- Ocena
- 5
P
PrintablesLilifee
Air quality sensor case ESP32
Air quality sensor case for ESP32 I designed this case for an ESP32 LOLIN32 witch sends the air quality to my home automation server (Loxone). I added two separate sensors to measure air quality in my living room, the MHZ-19 for the CO2…
- Pobrania
- 737
- Polubienia
- 153
- Ocena
- 5