Microaces Scrappee Battery tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use 'oversized' packs (200 -220Mah) in my Scrappee. This tray makes them to drop into place with the CG already set.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I use 3 different 'oversized' battery packs (200 -220Mah) in my Scrappee.
I found three problems with this:-
(1) The packs don't fit in the cowling.
(2) The packs were resting on top of the servos
(3) the packs move around and upset the C of G.
This tray fixes these issues.
(1) It lifts the pack up so that it doesn't foul the servos.
(2) Each pack is taped to its own tray in the right place to attain the correct C of G.
Now all I do is drop a tray into the plane knowing that the servos will work and the C of G is perfect :-)
If printed in PETG, the trays weigh 0.9G each.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Filament:
any
Notes:
If printed in PETG, the trays weigh 0.9G each (and don't snap!)
Category: R/C Vehicles