Microaces Scrappee Battery tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I use 'oversized' packs (200 -220Mah) in my Scrappee. This tray makes them to drop into place with the CG already set.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I use 3 different 'oversized' battery packs (200 -220Mah) in my Scrappee.
I found three problems with this:-
(1) The packs don't fit in the cowling.
(2) The packs were resting on top of the servos
(3) the packs move around and upset the C of G.
This tray fixes these issues.
(1) It lifts the pack up so that it doesn't foul the servos.
(2) Each pack is taped to its own tray in the right place to attain the correct C of G.
Now all I do is drop a tray into the plane knowing that the servos will work and the C of G is perfect :-)
If printed in PETG, the trays weigh 0.9G each.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Filament:
any
Notes:
If printed in PETG, the trays weigh 0.9G each (and don't snap!)
Category: R/C Vehicles