RadJet 800 Motor Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mix and match mount mount for the Radjet 800! I created these because I have a 2836 motor in the back and an 1800mAH…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Mix and match mount mount for the Radjet 800!
I created these because I have a 2836 motor in the back and an 1800mAH 4s pack in the front.
There are two problems with this idea:
(1) C of G is hopelessly out.
(2) Will the motor hold together on landing?
Use these spacers to adjust your C of G and also make the motor mount more solid.
If you have a big pack in the front then you'll need to move the motor further back to get the C of G in the right place. Use two small spacers followed by the combo spacer (and a second large spacer if needed). Bolt them all together and glue them in place.
Happy flying!
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Category: 3D Printing