RadJet 800 Motor Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mix and match mount mount for the Radjet 800! I created these because I have a 2836 motor in the back and an 1800mAH…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Mix and match mount mount for the Radjet 800!
I created these because I have a 2836 motor in the back and an 1800mAH 4s pack in the front.
There are two problems with this idea:
(1) C of G is hopelessly out.
(2) Will the motor hold together on landing?
Use these spacers to adjust your C of G and also make the motor mount more solid.
If you have a big pack in the front then you'll need to move the motor further back to get the C of G in the right place. Use two small spacers followed by the combo spacer (and a second large spacer if needed). Bolt them all together and glue them in place.
Happy flying!
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Category: 3D Printing